Ihr Warenkorb
Total
0.00
Continue Shopping
kt.COLOR kt.LACK
Semi-gloss paint for durable interior surfaces
Subtle, glossy, water-based paint for doors, furniture and wood paneling.
Description
The kt.LACK is a water-based, pollutant-free 1K paint with PU reinforcement for interior use. Ideal for smooth surfaces that require long-lasting protection and timeless beauty.
Medium gloss
Genuine kt.COLOR pigments
Good progress
Good coverage
Sandable
Easy to clean
Suitable for children's toys
Low odor
Non-yellowing
No Forever chemicals (PFAS)
No nanoparticles or microplastics
Swiss Environmental Label Cat. B
Equivalent to Minergie-ECO.
Notice
Resistance to aggressive chemicals (such as grease and acid) can be increased with a final coat of the water-based clear varnishes kt.COLOR M050 PUR Gloss Varnish, M054 PUR Satin Varnish or M056 Acrylic 2K Matt Varnish.
Subsoil
Suitable substrates: wood, wood-based materials, primed metals, sound existing coatings on hard surfaces.
The surfaces must be clean, dry and free of dirt, dust, grease, oil, soap, wax, release agents, peeling paint, mold or distemper.
Shiny surfaces should be dulled before painting.
New plaster, concrete and masonry surfaces must be allowed to set for at least 30 days before painting, be fully cured and have a pH < 10.
Remove any flaking paint and sand these areas to smooth the edges with the adjacent paint. Fill and prime these areas with a commercially available, solvent-based spray filler.
Construction
Wood, wood-based materials:
- Prime with M010 Acrylic Primer
- 2 coats of kt.LACK, possibly with intermediate sanding
Corrosion-protected metal:
- Prime with a suitable adhesion primer (compatibility test)
- 2 coats of kt.LACK, possibly with intermediate sanding
Strip old coatings based on synthetic resin or oil, or sand and degrease them, then:
- Prime with M010 Acrylic Primer
- 2 coats of kt.LACK, possibly with intermediate sanding
Surfaces to be sprayed with kt.LACK, such as MDF:
- Prime with filler primer (test compatibility)
- 2 coats of kt.LACK, possibly with intermediate sanding
- Concrete, masonry, hard plaster surfaces:
- Prime with M013 Tiefgrund
- 2 coats of kt.LACK
Processing and consumption
| Consumption | 100 g/m2 per coat, variations possible for individual colors and substrates. |
| Processing | Brushes, rollers (with paint roller, rounded on both sides) or sprayers (airless). |
| Dilution | Brushes, rollers: with water up to 10%. Spraying (airless) with M021 propylene glycol retarder up to 10% and water up to 10%. |
| Drying | Allow a drying time of at least 4-6 hours before the first coat and between coats; fully cured after approximately 5 days. |
| Temperature | Do not process below 5 °C or above 30 °C (substrate temperature). |
| Cleaning | With soapy water |
Characteristics
| Binder | Polyurethane-acrylic mixture |
| Pigments | Natural and mineral as well as highly resistant organic pigments |
| Solids | 49 % |
| Specific gravity | 1.4 g/ml |
| Pigment content | 49 % i.Tr |
| VOC | < 66 g/kg (80 g/l) |
| pH | 9 |
| Diffusion | sd > 1.4 m, Class 3 (film-forming). |
Classification according to EN 13300:2023-02
| Wet abrasion resistance. | Class 1 of 5 |
| Gloss 85° | 20 - 30 (medium shine) |
| Coverage | Class 2 of 4 |
| Max. grain size S | < 100 µm (fine) |
Labeling
Labelling according to Regulation (EC) No. 1272/2008 [CLP] not applicable. Not classified as dangerous goods.
Fire behavior classification according to DIN 4102-1 | EN 13501-1: B1-s2, d0 (flame-retardant)
MAL code Denmark (1993): 00-1
Water hazard class (WGK): 1 (low water hazard).
Composition 08KT001 Champagne White
Water 50.5%, Champagne chalk 7%, Marble 5%, Titanium dioxide 12%, Resin 17%, Propylene glycol 3.5%, DPnB 3%, Additives 2%, Preservatives* < 0.03%
Custom-made without added preservatives is possible.
*5-Chloro-2-Methyl-2H-Isothiazol-3-one and 2-Methyl-2H Isothiazol-3-one (3:1; 0.0085%), 1,2-benzisothiazoline 3-one (0.021%)
Safety instructions
- If medical advice is needed, have product container or label at hand.
- Keep out of reach of children.
- Read all instructions carefully and follow them.
- EUH208: Contains 1,2-benzisothiazol-3(2H)-one; mixture of: 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction.
- EUH210: Safety data sheet available on request.
Disposal
EU waste code no. 08 01 12. Only empty containers should be recycled.
Disclaimer
The information in this leaflet can only be considered general guidance. The multitude of possible applications and processing methods precludes any claims arising from this information. A guarantee can only be given for the consistently high quality of our products. All previous versions of this leaflet are hereby invalid.
Safety data sheets available upon request.